Mounting |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_SanitaryMounting |
| Mounting | The property enumeration Pset_SanitaryMountingEnum defines the forms of mounting or fixing of the sanitary terminal that may be specified within property sets used to define sanitary terminals (WC’s, basins, sinks, etc.) where:-
BackToWall: A pedestal mounted sanitary terminal that fits flush to the wall at the rear to cover its service connections
.
Pedestal: A floor mounted sanitary terminal that has an integral base
.
CounterTop: A sanitary terminal that is installed into a horizontal surface that is installed into a horizontal surface. Note: When applied to a wash hand basin, the term more normally used is ‘vanity’. See also Wash Hand Basin Type specification.
WallHung: A sanitary terminal cantilevered clear of the floor.
Note that BackToWall, Pedestal and WallHung are allowable values for a bidet. |
| 装着 | 列挙するプロパティはPset_SanitaryMountingEnumでは(トイレの、洗面台、シンクなど)、衛生配管への装着法で定義される:
床置き壁排水:台座は、カバーの背面の壁にあるフラッシュバルブに接続される。
床置き:床の衛生配管に装着される。
カウンター:水平面に設置された衛生配管に接続します。注:手洗器があると、通常は'化粧'が使用される。手洗器を参照。
壁掛け:衛生配管は壁から出され床には何もなくなる。。
床置き壁排水、床置き、壁掛けは、ビデの許容値であることに注意。 |
|