7.4.4.16 Pset_DamperTypeCommon

PSET_TYPEDRIVENOVERRIDE / IfcDamper

Natural language names
Damper Type Common
Change log
ItemSPFXMLChangeDescription
4.0.1.0
    Pset_DamperTypeCommon
      BladeMaterialDELETED
      SealMaterialDELETED
      FrameMaterialDELETED
Properties

buildingSMART Data Dictionary

PSD-XML

NameTypeDescription
Reference P_SINGLEVALUE / IfcIdentifier *
BauteiltypBezeichnung zur Zusammenfassung gleichartiger Bauteile zu einem Bauteiltyp (auch Konstruktionstyp genannt). Alternativ zum Namen des "Typobjekts", insbesondere wenn die Software keine Typen unterstützt.
ReferenceReference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types.
ReferenceRéférence à l'identifiant d'un type spécifié dans le contexte du projet (exemple : "type A1") pour désigner un "type de construction". Une alternative au nom d'un objet type lorsque les objets types ne sont pas gérés par le logiciel.
参照記号このプロジェクトにおける参照記号(例:A-1)。分類コードではなく内部で使用されるプロジェクトタイプとして使用されるもの。
参考号若未采用已知的分类系统,则该属性为该项目中该类型构件的参考编号(例如,类型A-1)。
Status P_ENUMERATEDVALUE / IfcLabel / PEnum_ElementStatus*
StatusStatus bzw. Phase des Bauteils insbesondere beim Bauen im Bestand. "Neu" (new) neues Bauteil als Ergänzung, "Bestand" (existing) bestehendes Bauteil, dass erhalten bleibt, "Abbruch" (demolish) Bauteil, das abgebrochen wird, "Temporär" (temporary) Bauteil und andere Bauelemente, die vorübergehend eingebaut werden (wie Abstützungen, etc.)
StatusStatus of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).
StatutStatut de l'élément, principalement utilisé dans les projets de rénovation et de réhabilitation. Le statut a pour valeur NOUVEAU pour un nouvel élément, EXISTANT pour un élément existant qui est conservé, DEMOLI pour un élément existant à démolir et TEMPORAIRE pour un élément temporaire (comme une structure support provisoire).
状態要素(主にリノベーションまたは改修プロジェクトにおいて)の状態。 状態は、「新規(New)」-新しく追加される要素。「既存」-要素は存在し、かつ残りもの。「破壊」-要素は存在したが、廃棄されるもの。「一時的」-一時的に存在する要素(一時的にサポートしている構造のようなもの)。
Operation P_ENUMERATEDVALUE / IfcLabel / PEnum_DamperOperation
OperationThe operational mechanism for the damper operation.
Orientation P_ENUMERATEDVALUE / IfcLabel / PEnum_DamperOrientation
OrientationThe intended orientation for the damper as specified by the manufacturer.
BladeThickness P_SINGLEVALUE / IfcPositiveLengthMeasure
Blade ThicknessThe thickness of the damper blade.
BladeAction P_ENUMERATEDVALUE / IfcLabel / PEnum_DamperBladeAction
Blade ActionBlade action.
BladeShape P_ENUMERATEDVALUE / IfcLabel / PEnum_DamperBladeShape
Blade ShapeBlade shape. Flat means triple V-groove.
BladeEdge P_ENUMERATEDVALUE / IfcLabel / PEnum_DamperBladeEdge
Blade EdgeBlade edge.
NumberofBlades P_SINGLEVALUE / IfcInteger
Numberof BladesNumber of blades.
FaceArea P_SINGLEVALUE / IfcAreaMeasure
Face AreaFace area open to the airstream.
MaximumAirFlowRate P_SINGLEVALUE / IfcVolumetricFlowRateMeasure
Maximum Air Flow RateMaximum allowable air flow rate.
TemperatureRange P_BOUNDEDVALUE / IfcThermodynamicTemperatureMeasure
Temperature RangeTemperature range.
MaximumWorkingPressure P_SINGLEVALUE / IfcPressureMeasure
Maximum Working PressureMaximum working pressure.
TemperatureRating P_SINGLEVALUE / IfcThermodynamicTemperatureMeasure
Temperature RatingTemperature rating.
NominalAirFlowRate P_SINGLEVALUE / IfcVolumetricFlowRateMeasure
Nominal Air Flow RateNominal air flow rate.
OpenPressureDrop P_SINGLEVALUE / IfcPressureMeasure
Open Pressure DropTotal pressure drop across damper.
LeakageFullyClosed P_SINGLEVALUE / IfcVolumetricFlowRateMeasure
Leakage Fully ClosedLeakage when fully closed.
LossCoefficentCurve P_TABLEVALUE / IfcPositivePlaneAngleMeasure / IfcReal
Loss Coefficent CurveLoss coefficient – blade position angle curve; ratio of pressure drop to velocity pressure versus blade angle; C = f (blade angle position).
LeakageCurve P_TABLEVALUE / IfcVolumetricFlowRateMeasure / IfcPressureMeasure
Leakage CurveLeakage versus pressure drop; Leakage = f (pressure).
RegeneratedSoundCurve P_TABLEVALUE / IfcVolumetricFlowRateMeasure / IfcSoundPressureMeasure
Regenerated Sound CurveRegenerated sound versus air flow rate.
FrameType P_SINGLEVALUE / IfcLabel
Frame TypeThe type of frame used by the damper (e.g., Standard, Single Flange, Single Reversed Flange, Double Flange, etc.).
FrameDepth P_SINGLEVALUE / IfcPositiveLengthMeasure
Frame DepthThe length (or depth) of the damper frame.
FrameThickness P_SINGLEVALUE / IfcPositiveLengthMeasure
Frame ThicknessThe thickness of the damper frame material.
CloseOffRating P_SINGLEVALUE / IfcPressureMeasure
Close Off RatingClose off rating.

Link to this page  Link to this page