IfcFilter

Natural language names
Filter
Filter
Filtre
Change log
ItemSPFXMLChangeDescription
4.0.0.0
    IfcFilterADDED
4.0.1.0
    IfcFilter
      HasCoveringsADDED
Semantic definitions at the entity
Entity definition

A filter is an apparatus used to remove particulate or gaseous matter from fluids and gases.

HISTORY  New entity in IFC4
Attribute definitions
#AttributeTypeCardinalityDescription R
9PredefinedTypeIfcFilterTypeEnum? X
Formal Propositions
RuleDescription
CorrectPredefinedTypeEither the PredefinedType attribute is unset (e.g. because an IfcFilterType is associated), or the inherited attribute ObjectType shall be provided, if the PredefinedType is set to USERDEFINED.
CorrectTypeAssignedEither there is no filter type object associated, i.e. the IsTypedBy inverse relationship is not provided, or the associated type object has to be of type IfcFilterType.
Inherited definitions from supertypes
Entity inheritance IfcFlowTreatmentDevice IfcDistributionFlowElement IfcDistributionElement IfcElement IfcProduct IfcObject IfcObjectDefinition IfcRoot
Attribute inheritance
#AttributeTypeCardinalityDescriptionR
IfcRoot
1GlobalIdIfcGloballyUniqueId Assignment of a globally unique identifier within the entire software world. X
2OwnerHistoryIfcOwnerHistory? Assignment of the information about the current ownership of that object, including owning actor, application, local identification and information captured about the recent changes of the object,
NOTE  only the last modification in stored - either as addition, deletion or modification.
IFC4 CHANGE  The attribute has been changed to be OPTIONAL.
X
3NameIfcLabel? Optional name for use by the participating software systems or users. For some subtypes of IfcRoot the insertion of the Name attribute may be required. This would be enforced by a where rule. X
4DescriptionIfcText? Optional description, provided for exchanging informative comments.X
IfcObjectDefinition
HasAssignmentsIfcRelAssigns
@RelatedObjects
S[0:?]Reference to the relationship objects, that assign (by an association relationship) other subtypes of IfcObject to this object instance. Examples are the association to products, processes, controls, resources or groups.X
NestsIfcRelNests
@RelatedObjects
S[0:1]References to the decomposition relationship being a nesting. It determines that this object definition is a part within an ordered whole/part decomposition relationship. An object occurrence or type can only be part of a single decomposition (to allow hierarchical strutures only).
IFC4 CHANGE  The inverse attribute datatype has been added and separated from Decomposes defined at IfcObjectDefinition.
IsNestedByIfcRelNests
@RelatingObject
S[0:?]References to the decomposition relationship being a nesting. It determines that this object definition is the whole within an ordered whole/part decomposition relationship. An object or object type can be nested by several other objects (occurrences or types).
IFC4 CHANGE  The inverse attribute datatype has been added and separated from IsDecomposedBy defined at IfcObjectDefinition.
X
HasContextIfcRelDeclares
@RelatedDefinitions
S[0:1]References to the context providing context information such as project unit or representation context. It should only be asserted for the uppermost non-spatial object.
IFC4 CHANGE  The inverse attribute datatype has been added.
IsDecomposedByIfcRelAggregates
@RelatingObject
S[0:?]References to the decomposition relationship being an aggregation. It determines that this object definition is whole within an unordered whole/part decomposition relationship. An object definitions can be aggregated by several other objects (occurrences or parts).
IFC4 CHANGE  The inverse attribute datatype has been changed from the supertype IfcRelDecomposes to subtype IfcRelAggregates.
X
DecomposesIfcRelAggregates
@RelatedObjects
S[0:1]References to the decomposition relationship being an aggregation. It determines that this object definition is a part within an unordered whole/part decomposition relationship. An object definitions can only be part of a single decomposition (to allow hierarchical strutures only).
IFC4 CHANGE  The inverse attribute datatype has been changed from the supertype IfcRelDecomposes to subtype IfcRelAggregates.
X
HasAssociationsIfcRelAssociates
@RelatedObjects
S[0:?]Reference to the relationship objects, that associates external references or other resource definitions to the object.. Examples are the association to library, documentation or classification.X
IfcObject
5ObjectTypeIfcLabel? The type denotes a particular type that indicates the object further. The use has to be established at the level of instantiable subtypes. In particular it holds the user defined type, if the enumeration of the attribute PredefinedType is set to USERDEFINED.
X
IsTypedByIfcRelDefinesByType
@RelatedObjects
S[0:1]Set of relationships to the object type that provides the type definitions for this object occurrence. The then associated IfcTypeObject, or its subtypes, contains the specific information (or type, or style), that is common to all instances of IfcObject, or its subtypes, referring to the same type.
IFC4 CHANGE  New inverse relationship, the link to IfcRelDefinesByType had previously be included in the inverse relationship IfcRelDefines. Change made with upward compatibility for file based exchange.
X
IsDefinedByIfcRelDefinesByProperties
@RelatedObjects
S[0:?]Set of relationships to property set definitions attached to this object. Those statically or dynamically defined properties contain alphanumeric information content that further defines the object.
IFC4 CHANGE  The data type has been changed from IfcRelDefines to IfcRelDefinesByProperties with upward compatibility for file based exchange.
X
IfcProduct
6ObjectPlacementIfcObjectPlacement? Placement of the product in space, the placement can either be absolute (relative to the world coordinate system), relative (relative to the object placement of another product), or constraint (e.g. relative to grid axes). It is determined by the various subtypes of IfcObjectPlacement, which includes the axis placement information to determine the transformation for the object coordinate system.X
7RepresentationIfcProductRepresentation? Reference to the representations of the product, being either a representation (IfcProductRepresentation) or as a special case a shape representations (IfcProductDefinitionShape). The product definition shape provides for multiple geometric representations of the shape property of the object within the same object coordinate system, defined by the object placement.X
IfcElement
8TagIfcIdentifier? The tag (or label) identifier at the particular instance of a product, e.g. the serial number, or the position number. It is the identifier at the occurrence level.X
FillsVoidsIfcRelFillsElement
@RelatedBuildingElement
S[0:1]Reference to the IfcRelFillsElement Relationship that puts the element as a filling into the opening created within another element.
HasOpeningsIfcRelVoidsElement
@RelatingBuildingElement
S[0:?]Reference to the IfcRelVoidsElement relationship that creates an opening in an element. An element can incorporate zero-to-many openings. For each opening, that voids the element, a new relationship IfcRelVoidsElement is generated. X
ContainedInStructureIfcRelContainedInSpatialStructure
@RelatedElements
S[0:1]Containment relationship to the spatial structure element, to which the element is primarily associated. This containment relationship has to be hierachical, i.e. an element may only be assigned directly to zero or one spatial structure. X
IfcDistributionElement
IfcDistributionFlowElement
IfcFlowTreatmentDevice
IfcFilter
9PredefinedTypeIfcFilterTypeEnum? X
Definitions applying to Reference View

 Instance diagram


Concept usage

Object Typing

The Object Typing concept template applies to this entity as shown in Table 266.

HasTypeRelatingType
IfcFilterType

Table 266 — IfcFilter Object Typing



Property Sets for Objects

The Property Sets for Objects concept template applies to this entity as shown in Table 267.

PsetNameProperties
Pset_FilterTypeCommon
TemplatePropertyNameValueUpperValueLowerValueSetValueReference
Single ValueReferenceIfcIdentifier
Enumerated ValueStatusIfcLabelPEnum_ElementStatus
Single ValueWeightIfcMassMeasure
Single ValueInitialResistanceIfcPressureMeasure
Single ValueFinalResistanceIfcPressureMeasure
Bounded ValueOperationTemperatureRangeIfcThermodynamicTemperatureMeasure
Bounded ValueFlowRateRangeIfcVolumetricFlowRateMeasure
Single ValueNominalFilterFaceVelocityIfcLinearVelocityMeasure
Single ValueNominalMediaSurfaceVelocityIfcLinearVelocityMeasure
Single ValueNominalPressureDropIfcPressureMeasure
Single ValueNominalFlowrateIfcVolumetricFlowRateMeasure
Single ValueNominalParticleGeometricMeanDiameterIfcPositiveLengthMeasure
Single ValueNominalParticleGeometricStandardDeviationIfcReal

Table 267 — IfcFilter Property Sets for Objects



Quantity Sets

The Quantity Sets concept template applies to this entity as shown in Table 268.

QsetNameQuantitiesComplexQuantities
Qto_FilterBaseQuantities
TemplateQuantityNameWeightValue
Weight QuantityGrossWeight

Table 268 — IfcFilter Quantity Sets



mvdXML Specification
<?xml version="1.0"?>
<ConceptRoot xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" uuid="59ce0cae-c2dc-4cc2-b3f9-5a0c3f8747c6" name="IfcFilter" status="sample" applicableRootEntity="IfcFilter">
  <Applicability uuid="00000000-0000-0000-0000-000000000000" status="sample">
    <Template ref="42ba747a-9825-41b1-a3cd-cafe7b8a55a5" />
    <TemplateRules operator="and" />
  </Applicability>
  <Concepts>
    <Concept uuid="816352a7-6b21-425d-9bc4-13c3ecbe921d" name="Object Typing" status="sample" override="false">
      <Template ref="35a2e10e-20df-40f4-ab2f-dacf0a6744f4" />
      <Requirements>
        <Requirement applicability="export" requirement="recommended" exchangeRequirement="dcd96125-898e-4ff0-b294-eb02afe953aa" />
        <Requirement applicability="import" requirement="recommended" exchangeRequirement="dcd96125-898e-4ff0-b294-eb02afe953aa" />
      </Requirements>
      <TemplateRules operator="and">
        <TemplateRule Parameters="RelatingType=IfcFilterType;" />
      </TemplateRules>
    </Concept>
    <Concept uuid="01af4f10-6887-40fa-a03c-43186e676525" name="Property Sets for Objects" status="sample" override="false">
      <Template ref="f74255a6-0c0e-4f31-84ad-24981db62461" />
      <TemplateRules operator="and">
        <TemplateRule Parameters="PsetName=Pset_FilterTypeCommon;" />
      </TemplateRules>
    </Concept>
    <Concept uuid="ae6b0339-a6b6-418e-be82-e1380d27bfdf" name="Quantity Sets" status="sample" override="false">
      <Template ref="6652398e-6579-4460-8cb4-26295acfacc7" />
      <TemplateRules operator="and">
        <TemplateRule Parameters="QsetName=Qto_FilterBaseQuantities;" />
      </TemplateRules>
    </Concept>
  </Concepts>
</ConceptRoot>
Concept inheritance

#ConceptTemplateModel View
IfcRoot
IdentitySoftware IdentityReference View
Revision ControlRevision ControlReference View
IfcObjectDefinition
ClassificationClassificationReference View
IfcObject
Object User IdentityObject User IdentityReference View
Object Predefined TypeObject Predefined TypeReference View
Property Sets for ObjectsProperty Sets with OverrideReference View
IfcElement
Product Local PlacementProduct Local PlacementReference View
CoG GeometryCoG GeometryReference View
Box GeometryBox GeometryReference View
Body Solid Geometry GeneralBody Geometry GeneralReference View
Body Tessellation GeometryBody Tessellation GeometryReference View
Body SweptSolid PolyCurve GeometryBody SweptSolid PolyCurve GeometryReference View
Mapped GeometryMapped GeometryReference View
Product Geometry LayerProduct Geometry LayerReference View
Product Geometry ColourProduct Geometry ColourReference View
Spatial ContainmentSpatial ContainmentReference View
Element CompositionElement CompositionReference View
Element DecompositionElement DecompositionReference View
Element VoidingElement VoidingReference View
Material SingleMaterial Single for Objects with OverrideReference View
Material ConstituentMaterial Constituent Set with OverrideReference View
ClassificationClassification for Objects with OverrideReference View
IfcDistributionElement
Component to Distribution SystemComponent to Distribution SystemReference View
Port NestingPort NestingReference View
Clearance GeometryClearance GeometryReference View
IfcFilter
Object TypingObject TypingReference View
Property Sets for ObjectsProperty Sets for ObjectsReference View
Quantity SetsQuantity SetsReference View
Formal representations
XML Specification
 <xs:element name="IfcFilter" type="ifc:IfcFilter" substitutionGroup="ifc:IfcFlowTreatmentDevice" nillable="true"/>
 <xs:complexType name="IfcFilter">
  <xs:complexContent>
   <xs:extension base="ifc:IfcFlowTreatmentDevice">
    <xs:attribute name="PredefinedType" type="ifc:IfcFilterTypeEnum" use="optional"/>
   </xs:extension>
  </xs:complexContent>
 </xs:complexType>
EXPRESS Specification
ENTITY IfcFilter
 SUBTYPE OF (IfcFlowTreatmentDevice);
  PredefinedType : OPTIONAL IfcFilterTypeEnum;
 WHERE
  CorrectPredefinedType : NOT(EXISTS(PredefinedType)) OR
(PredefinedType <> IfcFilterTypeEnum.USERDEFINED) OR
((PredefinedType = IfcFilterTypeEnum.USERDEFINED) AND EXISTS (SELF\IfcObject.ObjectType));
  CorrectTypeAssigned : (SIZEOF(IsTypedBy) = 0) OR
('IFCHVACDOMAIN.IfcFilterType' IN TYPEOF(SELF\IfcObject.IsTypedBy[1].RelatingType));
END_ENTITY;

Link to EXPRESS-G diagram EXPRESS-G diagram

Link to this page  Link to this page