Definition from buildingSMART. A description of the door panel. A door panel is normally a door leaf that opens to allow people or goods to pass. The parameters of the door panel define the geometrically relevant parameter of the panel,
The IfcDoorPanelProperties are included in the list of properties , given by attribute HasPropertySets of the IfcDoorStyle. More information about the door panel can be included in the same list of the IfcDoorStyle using the IfcPropertySet for dynamic extensions.
HISTORY New Entity in IFC Release 2.0.
Geometry Use Definitions
The IfcDoorPanelProperties does not hold an own geometric representation. However it defines parameter, which can be used to create the shape of the door style (which is inserted by the IfcDoor into the spatial context of the project).
Interpretation of parameters
The parameters of the IfcDoorPanelProperties define a standard door panel, including (if given) a proportional width to define non-uniform double swing (or sliding, or folding) doors. The outer boundary of the panel is determined by the occurrence parameter assigned to the IfcDoor, which inserts the IfcDoorStyle. It has to take the lining parameter into account as well.
|The depth of
the panel (swinging, double-acting, and sliding panels) is defined by
the PanelDepth parameter.
operation types that include more than one panel, the width of (at
least) one panel is given by a normalised ratio measure. It determines
the width of that panel, which is defined as a ratio of the overall
width of the door opening.
|PanelDepth||:||Depth of the door panel, measured perpendicular to the plane of the door leaf.|
|PanelOperation||:||The PanelOperation defines the way of operation of that panel. The PanelOperation of the door panel has to correspond with the OperationType of the IfcDoorStyle.|
|PanelWidth||:||Width of this panel, given as ratio relative to the total clear opening width of the door.|
|PanelPosition||:||Position of this panel within the door.|
|ShapeAspectStyle||:||Pointer to the shape aspect, if given. The shape aspect reflects the part of the door shape, which represents the door panel.|
The IfcDoorPanelProperties shall only be used in the context of an IfcDoorStyle.